Pico 2 Board Computers SC1631

Raspberry Pi's SC1631 Pico 2 microcontroller board is built on the RP2350 next-generation high-performance, secure microcontroller. Pico 2 is fully hardware and software compatible with Pico 1, and has powerful features including twice the RAM, twice the on-board Flash memory, and faster dual Arm M33 CPUs.

Features

• Based on the RP2350
• Dual Arm M33s at 150 MHz with FPU
• 520 KiB of SRAM
• Robust security features (signed boot, OTP, SHA-256, TRNG, glitch detectors and Arm TrustZone for Cortex-M)
• Optional, dual RISC-V Hazard3 CPUs at 150 MHz
• Low-power operation
• PIO v2 with 3 × programmable I/O co-processors (12 × programmable I/O state machines) for custom peripheral support
• Support for PSRAM, faster off-chip XIP QSPI Flash interface
• 4 MB on-board QSPI Flash storage
• 5 V tolerant GPIOs
• Open source C/C++ SDK, MicroPython support
• Software-compatible with Pico 1/RP2040
• Drag-and-drop programming using mass storage over USB
• Castellated module allows soldering directly to carrier boards
• Footprint- and pin-compatible with Pico 1 (21 mm × 51 mm form factor)
• 26 multifunction GPIO pins, including three analog inputs
• Operating temperature: -20°C to +85°C
• Supported input voltage: 1.8 VDC to 5.5 VDC

Applications

• Education, experimentation, and prototyping
• Robotics and drones
• Retro computing and emulation
• Cost-optimized embedded computing
• Secure computing with trusted firmware
• IoT and networked devices
• Real-time PLCs and protocol gateways
• High-performance I/O, including multimedia displays