RASPBERRY-PI SC0874

Raspberry Pi Camera Module 3 Wide, IMX708, Raspberry Pi Computers

Raspberry Pi compact camera module 3 wide. It offers an IMX708 12-megapixel sensor with HDR, and features phase detection autofocus. It can be used to take full HD video as well as stills photographs, and features an HDR mode up to 3 megapixels. Its operation is fully supported by the libcamera library, including camera module 3’s rapid autofocus feature: this makes it easy for beginners to use, while offering plenty for advanced users. Camera module 3 is compatible with all Raspberry Pi computers. The PCB size and mounting holes remain the same as for camera module 2.

• Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
• High signal-to-noise ratio (SNR), built-in 2D dynamic defect pixel correction (DPC)
• Phase detection autofocus (PDAF) for rapid autofocus
• QBC re-mosaic function, HDR mode (up to 3 megapixel output)
• CSI-2 serial data output, 2-wire serial control of focus mechanism
• 2-wire serial communication (supports I2C fast mode and fast-mode plus)
• Dimension is 0.98 × 0.94 × 0.45inch, 0°C to 50°C operating temperature
• 5cm–∞ focus range, 2.75mm focal length, 67degrees vertical field of view
• 120degrees diagonal field of view, 102degrees horizontal field of view
• F2.2 focal ratio (F-stop), 1.4μm × 1.4μm pixel

Footnotes

Whilst in use, this product should be firmly secured or should be placed on a stable, flat, non-conductive surface, and should not be contacted by conductive items.