ARCTIC ACFAN00186A P12 PWM PST RGB Semi-passive 120 mm Case fan w/ Analogue RGB

Arctic

No reviews yet Write a Review
SKU:
CCACFAN00186A
MPN: ACFAN00186A
$14.98
UPC:
840033400947
$14.98

Description

P12 PWM PST RGB 0dB

Semi-passive 120 mm case fan with analogue RGB

0-db-mode-zero-rpm.jpg

0 dB MODE - ZERO RPM

The speed of the P12 PWM PST RGB 0dB can be throttled to a standstill via PWM.
This allows for silent operation in IDLE and at the same time guarantees maximum performance when needed.

OPTIMISED FOR HIGH STATIC PRESSURE

The P12 PWM PST RGB 0dB operates with a focused airflow and a high static pressure.
The fan thus guarantees extremely efficient cooling, even with increased air resistance, and is therefore suitable for use on heat sinks, radiators and filters.

optimised-for-high-static-pressure.jpg

 

rgb-for-full-colours.jpg

RGB FOR FULL COLOURS

The P12 PWM PST RGB 0dB has 12 analogue RGB LEDs in the fan barrel.
These can be controlled uniformly and are compatible with the common RGB standards of leading motherboard manufacturers.
The fan can thus be fully illuminated directly via the RGB mainboard connection or via an external controller and synchronised with the illumination of other hardware.

MAXIMUM SMOOTHNESS, MINIMUM VIBRATION

The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed.
In addition, the P12 PWM PST RGB 0dB has rubberised contact surfaces and thus reduces audible vibrations to a minimum.

maximum-smoothness-minimum-vibration.jpg

 

high-quality-plain-bearing.jpg

HIGH QUALITY PLAIN BEARING

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. In this way, less heat develops, less bearing noise is generated and the service life of the fan is extended.

Specifications

Brand:
Arctic
Weight:
0.80 LBS
Case Fan Model:
P12 PWM PST RGB 0dB
Speed:
0 - 2000 rpm
RPM Control:
Pulsweitenmodulation - PWM
Static Pressure:
48, 8 cfm / 82, 91 m³/h
Airflow:
1, 85 mm H2O
Bearing:
Fluid Dynamic Bearing
Cable Length:
40 + 8 cm
Connector:
4-Pin Connector + 4-Pin Socket
Current/Voltage:
0, 11 A / 12 V